Ortofon

Ortofon RS-309D 12" Walnut

Dynamic-balance tonearm

(KDV Dahil)

Havale/EFT ile %4 İndirimli
Teslimat süresi: 1-3 iş günü

-
+

PAYLAŞ

RS-309D 12 inch Ortofon’s D series tonearm takes analog sound reproduction to a higher level with highly configurable VTF options and a dynamic balance system for increased stability when tracking warps and other anomalies.

D series tonearms can be used for a wide array of cartridges, feature anti-skating control.

Features:

Dynamic balance graduated vertical tracking force (VTF) control through a new spring design
The new short wire spring, housed in the pivot case, eliminates unwanted vibrations in the tone arm
VTF in the range 0-5 grams can be precisely adjusted by means of the supplied digital force gauge
Anti-skate control adjusted by calibrated dial in the range 0-5 gram
Tone arm height, and thereby VTA, is easy adjustable on the tonearm base.
Detachable head shell and tone arm cable, with standard SME-type connectors
Please note: The AS-212S, AS-309S, RS-212D and RS-309D tonearms have a Japanese geometry, which will not directly fit the normal Baerwald alignment. Baerwald alignment has a zero tracking angle error at 66mm and 120.9 mm distance from the center of the platter.

  • * Havale (EFT) işlemlerinde %4 indirim uygulanmaktadır.
  • * Tek çekimde %2 indirim uygulanmaktadır.

Effective mass (without headshell)  - 4.0 g
Effective length (distance between the stylus and pivot point)  - 329 mm
Mounting distance between the pivot point and turntable center  - 314 mm
Offset angle  - 19 degrees
Overhang  - 15 mm
Tracking force adjusting range (direct reading)  - 0-5 g
Height adjustment range  - 42-57 mm
Diameter of  the armbase mounting hole - 34-36 mm
Diameter of the center shaft  - 16 mm
Fixing holes PCD  - dia. 50 mm
Size/Thread  - dia. 3.2 mm (dia. 3 mm x 20 mm and dia. 3 mm wood screw)
Digital scale DS-1 included
Headshell SH-4 Black included, headshell weight 9.4 g, screws weight 2 g

 
 

INSTAGRAM

#CANHIFI