Onkyo

Onkyo TX-RZ1100 Black

Unlock a Seamlessly Immersive Object-Audio Experience

(KDV Dahil)

PAYLAŞ

The THX®-certified TX-RZ1100 serves the discerning audiophile with a no-compromises 5.2.4-channel object-based audio experience. This reference receiver is perfect for quad in-ceiling speaker layouts supporting DTS:X® and Dolby Atmos® with mammoth dynamic power to drive front and rear floorstanders. Custom high-current amplification with sophisticated digital noise removal technology delivers stereo and multichannel sound that’s nothing short of spectacular. Stream from popular music apps via Chromecast built-in*, DTS Play-Fi®*, AirPlay, and Wi-Fi®; mirror any audio on supported wireless speakers and components via FlareConnect™*; and enjoy 4K/60p video supporting BT.2020 and High Dynamic Range (HDR10/Dolby Vision™*) pass-through on your main display and 4K/60p video on a second TV via Zone 2 HDMI®. The TX-RZ1100 is loaded with the A/V and custom home installation technologies you’d expect from a flagship receiver with dynamics that will take your breath away. * Enabled with a firmware update.

  • Up to 140W per Channel at 8 Ohms
  • AccuEQ Sound Optimization
  • 4K Ultra HD Upscaling and Pass-Through
  • HDMI with 3D and Audio Return Channel
  • 8x HDMI-In / 2x HDMI-Out
  • Built-In Wi-Fi Connectivity
  • Apple AirPlay and Bluetooth Connectivity
  • USB Connectivity
  • GUI On-Screen Display
  • THX Select2 Plus Certified

  • * Havale (EFT) işlemlerinde %4 indirim uygulanmaktadır.
  • * Tek çekimde %2 indirim uygulanmaktadır.

Output Power 140 W per channel @ 8 Ohms, 1 kHz, 0.08% THD, 2-channel driven, FTC
200 W per channel @ 6 Ohms, 1 kHz, 0.9% THD, 1-channel driven, FTC
Dynamic Power 320 W @ 3 Ohms, front
270 W @ 4 Ohms, front
160 W @ 8 Ohms, front
Output Impedance 4 to 16 Ohms
Channels 9.2
Tuner AM / FM
Frequency Response 5 Hz to 100 kHz (+1, -3 dB) (direct/pure audio)
Signal to Noise Ratio 108 dB (line, IHF-A)
90 dB (phono, IHF-A)
Surround Modes DTS: DTS HD Master Audio
Dolby: Dolby TrueHD, Dolby Digital Plus
Object-Based Audio Support Dolby Atmos, DTS:X
Video
Upscaling Yes, from 1080p to near-4K
Pass-Through 4K
Deep Color / x.v. Color Support Yes/Yes
Tuner Section
FM Frequency Range 87.5 to 107.9 MHz
AM Frequency Range 530 to 1710 kHz
AM/FM Presets 40
Connectivity
Bluetooth Yes
Wi-Fi Yes, IEEE 802.11 a/b/g/n 5 GHz / 2.4 GHz
AirPlay Yes
Inputs 8 x HDMI (1 front)
3 x Optical TOSLINK
2 x Digital coaxial
2 x Component video
2 x Composite video
7 x Stereo RCA audio (1 phono)
1 x USB (rear)
Outputs 2 x HDMI (1 ARC-compatible, 1 Zone 2)
1 x Component video
1 x Zone 2 stereo pre-out
1 x Zone 3 stereo pre-out
1 x 11.2-channel pre-out
1 x 1/4" (6.35 mm) headphone (front)
Other Ports 1 x Setup microphone input (front)
1 x FM tuner antenna
1 x AM tuner antenna
1 x Ethernet
1 x AC power cord
1 x IR remote in
1 x RS-232C
1 x Trigger out (12 VDC, 150 mA max)
Speaker Connectors 11 x Binding post pairs
HDMI CEC Yes
Audio Return Channel (ARC) Yes, on main HDMI output
HDCP Compliance HDCP 2.2 on inputs 1 to 5
3D Support Yes
Input Sensitivity and Impedance 200 mV / 82 kOhms (line)
3.5 mV / 47 kOhms (phono MM)
Output Level and Impedance Component Y, Composite Video: 1.0 V p-p/75 Ohms
Component PB/CB, PR/CR: 0.7 V p-p/75 Ohms
Component Video Frequency Response 5 Hz to 100 MHz, +0 dB, -3 dB
RCA Output Level and Impedance Pre-Out: 1.0 V/330 Ohms
Subwoofer Pre-Out: 1.0 V/330 Ohms
Zone Out: 200 mV/1.2 kOhms
Zone Pre-Out: 2.0 V/1.2 kOhms
Phono Overload 70 mV (MM, 1 kHz, 0.5%)
Tone Control Bass: ±10 dB, 100 Hz
Treble: ±10 dB, 10 kHz
General
On-Screen Display Yes
Power Requirements 120 VAC, 50/60 Hz
Power Consumption Operational: 320 W
Standby: 0.15 W
Dimensions (W x H x D) 17.125 x 7.94 x 17.81" (435 x 201 x 453 mm)
Weight 43 lb (19.5 kg)

 
 

INSTAGRAM

#CANHIFI