Nad

Nad C356BEE Black

Integrated Amplifiers

(KDV Dahil)

PAYLAŞ

Improving an award-winning design is always a delicate task. Adding performance and value to an already highly optimised design requires vision, talent, and expertise. Fortunately for our music-loving customers, all three are on clear display in the new C 356BEE. NAD fans already know that the initials “BEE” stand for Bjorn Erik Edvardsen, our Director of Advanced Development. BEE has once again applied lessons learned from our leading Masters Series M3 amplifier to the C 356BEE.

With the very high dynamic power and low impedance drive capability of our NAD PowerDrive™ circuit, the C 356BEE is able to accurately control difficult to drive loudspeakers while sounding musical, detailed, coherent and relaxed. Even at elevated listening levels, our exclusive Soft Clipping feature is there to save both your ears and your speakers from damaging clipping distortion.

  • * Havale (EFT) işlemlerinde %4 indirim uygulanmaktadır.
  • * Tek çekimde %2 indirim uygulanmaktadır.

Continuous output power into 8 ohms and 4 ohms (Stereo) >80 W (at rated THD, 20 Hz-20 kHz, both channels driven)
Rated THD1 20 Hz – 20 kHz, CCIF IMD, SMPTE IMD, DIM 100 <0.007 %
Clipping power >90 W (at 1 kHz 0.1 % THD)
IHF dynamic headroom - 8 ohms +2.6 dB
4 ohms +4.4 dB
IHF dynamic power - 8 ohms 145 W
4 ohms 220 W
2 ohms 290 W
Peak output current >50 A (in 1 ohm, 1 ms)
Signal-to-noise ratio >101 dB (A-weighted, ref. 1 W)
  >120 dB (A-weighted, ref. 80 W)
Damping factor >100 (at 8 ohms, 50 Hz and 1 kHz)
Frequency response ±0.3 dB (ref. 20 Hz - 20 kHz)
  3 Hz – 70 kHz (ref. -3 dB)
Input impedance 20 kohms + 1 nF
Input sensitivity 950 mV (for 80 W in 8 ohms)
Voltage gain 29 dB
Headphone output impedance 68 ohms
Channel separation - 1 kHz >80 dB
10 kHz >70 dB
Output resistance 75 ohms
Output current 150 mA
Output voltage +12 V ± 10 %

 
 

INSTAGRAM

#CANHIFI