Monitor Audio

Monitor Audio PL IN-WALL II Silver

(KDV Dahil)

Havale/EFT ile %4 İndirimli
Teslimat süresi: 1-3 iş günü

-
+

PAYLAŞ

The Platinum In-Wall II is a three-way reference architectural speaker system, perfect for custom home theatre projects where lifelike scale and dynamics are demanded. Equipped with an adjustable mid/high frequency driver array, the In-Wall is able to deliver pin-point audio imaging and consistency from both vertical or horizontal positions. By rotating the array though 90 degrees at the centre of a LCR configuration for instance, a soundstage of three Platinum In-Wall IIs will generate the seamless tonal integrity of the finest boxed systems from a stealthy in-wall location.

  • 2 x 6 1/2" RDT®II bass drivers
  • 4" RDT II mid-range driver
  • MPD (Micro Pleated Diaphragm) high frequency transducer designed specifically for Platinum II
  • New patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
  • Bespoke speaker terminals and footings
  • Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
  • Bolt through drivers: clearer sound and cleaner aesthetics
  • Rigid cabinet construction made from 25mm MDF with steel back
  • Extensive internal bracing using thick MDF cross bracing techniques
  • ARC baffle construction for ultimate rigidity and damping properties
  • Rotating mid/H.F housing to provide optimum directivity pattern for horizontal or vertical installation
  • Mid-range and HF level adjustment switches (+1/0/-1) dB
  • Highest quality crossover design utilizing metalized polypropylene capacitors and low loss inductors
  • Patented Tri-Grip dog leg fixing provides ultimate security, ease of installation and servicing
  • Magnetic trimless grille.

 

  • * Havale (EFT) işlemlerinde %4 indirim uygulanmaktadır.
  • * Tek çekimde %2 indirim uygulanmaktadır.

System Format 3 Way - 4 Driver
Frequency Response (-6dB - IEC 268-13)
52Hz - 100kHz
Sensitivity (1W@1M)
90dB
Maximum S.P.L.
117dBA (pair)
Nominal Impedance
4Ω (3.7Ω min. @ 2.8KHz)
Power Handling (RMS)
200W
Recommended Amplifier Requirements (RMS)
100 - 200W
Cabinet Design
Sealed Cabinet
Drive Unit Complement
2 x 61/2" RDT®II bass drivers / 1 x 4" RDT II mid-range driver / 1 x MPD high frequency transducer / Mid/ H.F Crossover Frequency (Hz), 4.1KHz 3rd Order (18dB/Octave)
Bass/Midrange Crossover Frequency (Hz)
700Hz/ 2nd Order (12dB/Octave)
Fixings
10 x Tri-Grip™ dog leg type fixing system
Overall Dimensions (H x W x D)
1205 x 330 x 102mm (477/16 x 13 x 4 inch)
Cut Out Depth
97.5mm (313/16 In.)
Weight (each)
27KG (59.4lb)

 
 

INSTAGRAM

#CANHIFI