Monitor Audio

Monitor Audio GOLD FX White

(KDV Dahil)

Havale/EFT ile %4 İndirimli
Teslimat süresi: 1-3 iş günü

-
+

PAYLAŞ

Amazing as it may seem, the Gold FX's slim wall-hugging profile incorporates no fewer than six drivers. In monopole mode for discrete side or rear sound channels its front-firing 6 ½" RST® bass/mid-driver and C-CAM® ribbon transducer deliver accurate ultra-wideband sound to match the tonal balance of any 'Gold' speaker combination. In dipole mode the Gold FX uses two pairs of side firing 4" C-CAM bass/mid drivers and 25mm C-CAM gold-dome tweeters, combined with the tailored output from the front-firing bass/mid driver to provide wonderfully diffuse yet tonally precise surround effects. The Gold FX can be flush-mounted on side or rear walls. Installation is made easy by the inclusion of a 'sloppy fit' wall bracket, which allows levelling and adjustment prior to fixing.

  • C-CAM® (Ceramic-Coated Aluminium/Magnesium) ribbon transducer design – providing extension to a class leading 60KHz
  • Single bolt through driver fixings for improved bracing, rigidity and driver/baffle de-coupling
  • New C-CAM RST® (Rigid Surface Technology) drivers
  • Die-cast alloy terminal panel arrangement with high quality bi-wire terminals and high end spade type link cables
  • Pureflow® silver internal cabling
  • Selected premium quality wood veneer or high gloss lacquer finishes
  • Rigid 20mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet colouration.

 

  • * Havale (EFT) işlemlerinde %4 indirim uygulanmaktadır.
  • * Tek çekimde %2 indirim uygulanmaktadır.

System Format 2-Way
Frequency Response
60 Hz - 60 kHz
Sensitivity (1W@1M)
87 dB
Nominal Impedance (ohms)
8
Maximum S.P.L (dBA)
110.8
Power Handling - R.M.S. (W)
100
Recommended Amplifier Requirements (W)
50 - 100
Bass Alignment
Sealed Cabinet
Crossover Frequency
Bi-Pole: 2.3 kHz / Di-Pole: 2.6 kHz
Drive Unit Complement
1 x 61/2" RST® bass driver / 2 x 4" RST mid-range driver / 1 x C-CAM® H.F ribbon transducer / 2 x 1" gold dome C-CAM Tweeter
Cabinet Dimensions (HxWxD)
310 x 390 x 160 mm
Complete Dimensions Inc Terminals, Plinths & Spikes (HxWxD)
310 x 390 x 168 mm
Weight (each)
11.9kg (26lb 2oz)

 
 

INSTAGRAM

#CANHIFI